數控機床為一次裝夾,連續自動加工完成所有車削工序,要注意以下幾個方面:
1.合理選擇切削用量。
2.合理選擇刀具
?。?/font>1)粗車時,要選強度高、耐用度好的刀具,以便滿足粗車時大背吃刀量、大進給量的要求;
?。?/font>2)精車時,要選精度高、耐用度好的刀具,以保證加工精度的要求。;
?。?/font>3)為減少換刀時間和方便對刀,應盡量采用機夾刀和機夾刀片。
3.合理選擇夾具
?。?/font>1)盡量選用通用夾具裝夾工件,避免采用夾具;
?。?/font>2)零件定位基準重合,以減少定位誤差。
4.確定數控機床加工路線
加工路線是指數控機床加工過程中,刀具相對零件的運動軌跡和方向;
?。?/font>1)應能保證加工精度和表面粗糙要求;
?。?/font>2)應盡量縮短加工路線,減少刀具空行程時間。
5.數控機床加工路線與加工余量的聯系
目前,在數控機床還未達到普及使用的條件下,一般應把毛坯上過多的余量,特別是含有鍛、鑄硬皮層的余量安排在普通車床上加工。如必須用數控機床加工時,則需注意程序的靈活安排。
6.夾具安裝要點
目前液壓卡盤和液壓夾緊油缸的連接是靠拉桿實現的。液壓卡盤夾緊要點如下:首先用搬手卸下液壓油缸上的螺帽,卸下拉管,并從主軸后端抽出,再用搬手卸下卡盤固定螺釘,即可卸下卡盤。
金嶺股份 匠心智造 精益求精;數控機床-研磨拋光機-車銑復合機床-平面磨床-多軸聯動加工中心,湖南省原機械部定點車床生產廠家、國有中一型企業,國家高新技術企業。
金嶺機床(原長沙二機床廠)創(chuàng )建于1956年,是我國原機械部定點車床生產廠家、國 有中一型企業,現為國家高新技術企業、*百家創(chuàng )新型企業,改制成立于2017年8月(簡稱:金嶺股份) ,專業從事數控切削磨削設備及智能研磨拋光裝備的國家高新技術企業。
集團占地100余畝,擁有研發中心、辦公大樓、聯合廠房近15000平方米、各類設備近200臺,檢測設備近 100 余臺,資產過億元。我們的客戶需要的不僅僅是我們的產品,更需要我們多元化的服務,包括為客 戶提供一站式專機、柔性生產線整體工藝解決方案,新設備融資租賃服務等
歡迎您關注我們的微信公眾號了解更多信息
微信掃一掃