滾珠絲杠傳動由于其有傳動效率高、傳動精度高、運動平穩、壽命長以及可預緊消隙等優點,所以在CNC數控車床中被廣泛使用。那么,在日常中要如何做好CNC數控車床滾珠絲桿螺母副的維護保養呢?
1、定期檢查滾珠絲杠螺母副的軸向間隙:一般情況下可以用控制系統自動補償來消除間隙;當間隙過大,可以通過調整滾珠絲杠螺母副來保證,CNC數控車床滾珠絲杠螺母副多數采用雙螺母結構,可以通過雙螺母預緊消除間隙。
2、定期檢查絲杠防護罩:以防止塵埃和磨粒黏結在絲杠表面,影響絲杠使用壽命和精度,發現絲杠防護罩破損應及時維修和更換。
3、定期檢查滾珠絲杠螺母副的潤滑:滾珠絲杠螺母副潤滑劑可以分為潤滑脂和潤滑油兩種。潤滑脂沒半年更換一次,清洗絲杠上的舊潤滑脂,涂上新的潤滑脂;用潤滑油的滾軸絲杠螺母副,可在每次機床工作前加油一次。
4、定期檢查支撐軸承:應定期檢查絲杠支撐軸承與CNC數控車床連接是否有松動,以及支撐軸承是否損壞等,如有要及時緊固松動部位并更換支撐軸承。
金嶺股份為更加適應市場需求,審時度勢,將公司產品全系列化,以項目事業部制成功引進歐洲技術團隊將CNC數控重車削精密車床、數控臥式精密鏜銑床全系列化進行到底,在專注制造中,“設備+工藝”成為金嶺1力的兩翼。并在集團公司引導下導入ERP管理,使用信息化平臺得到加強。終實現了在數控鏜銑床行業普遍不景氣形勢下的逆勢上揚。
2021年公司將以兵裝、工程機械、光伏行業等1裝備的技術引進、創(chuàng )新及轉移轉化為核心,結合湖南(長株潭)產業結構特點,進行軍民兩用數控機床及1專機智能裝備等產品的設計開發和產業化,助力兵裝、工程機械、光伏行業等1裝備制造技術水平提升及湖南(長株潭)產業集群發展壯大,為湖南打造“三個高地”、打造1裝備制造業基地作出新的更大貢獻。金嶺股份為更好地幫助客戶解決多樣性的零件加工及數控機床應用場景,并計劃建設裝備應用實驗室,數字化、可視化展廳,并持續推進產品升級迭代,全體金嶺人要緊緊圍繞機床“卡脖子”技術攻關,堅定不移地走“品質化、品牌化路線”, 充分發揮金嶺65年的技術底蘊和品牌度優勢轉化為企業發展新動力,緊盯“三化”(智能化、數字化、綠色化),以高新技術主導,堅持問題導向,加大力度推進我們的產品策略:堅持“引進、升級、再發展”,積累和發揮自身優勢,持續地豐厚、完善系列化產品,牢記公司愿景:樹百年金嶺,創(chuàng )。
歡迎您關注我們的微信公眾號了解更多信息
微信掃一掃